GARDINER folding bracket with valve
Product description
The GARDINER elbow joint with valve combines tool angle adjustment with the corresponding water control.
Features and application
Designed for use with tank systems or mixed-bed resins such as the UNGER Hydropower system, this elbow joint allows for quick and easy adjustment of the water flow with a simple turning motion.
Simply fit the elbow joint between your GARDINER telescopic pole and the desired brush. To start the water flow, turn the pole clockwise; to stop it, turn it counterclockwise. This innovative solution saves water and increases your efficiency when cleaning osmosis systems.
Important note
This component should not be used directly with osmosis systems, as this may cause damage to the system. It is primarily intended for use with tank systems or non-powered mixed-bed resin systems.
Technical data
- Maximum recommended pole height: approx. 15 metres
- Maximum recommended water temperature: 70°C
- Weight: approx. 130 g
Scope of delivery
- 1 x GARDINER elbow joint with valve
Check the connection and working angle
Compare both connections with your pole and the desired tool. In addition to the series, also check the thread or push-fit connection. Adjust the angle so that the tool sits flush, and check the locking mechanism before use.

03 / GUT ZU WISSEN
FRAGEN? KLÄREN WIR.
GARDINER folding bracket with valve
Frag uns. Wir helfen dir weiter.Für welchen Einsatz ist GARDINER Knickwinkel mit Ventil vorgesehen?
Der GARDINER Knickwinkel mit Ventil kombiniert die Werkzeugwinkeleinstellung mit der zugehörigen Wasserregelung.
Was gehört bei diesem Artikel konkret zum Lieferumfang?
1 x GARDINER Knickwinkel mit Ventil.
Welches Gewicht solltest du bei der Zusammenstellung berücksichtigen?
Das angegebene Gewicht beträgt ca. 130 g.
Wie lässt sich die Verbindung gegen unbeabsichtigtes Lösen sichern?
Stelle den Winkel so ein, dass das Werkzeug flächig anliegt, und kontrolliere die Verriegelung vor dem Einsatz.
Welche zwei Seiten musst du bei der Verbindung prüfen?
Vergleiche zuerst die Aufnahme an deiner Stange und dann die Aufnahme des Werkzeugs. Beide müssen zu diesem Adapter passen; eine Übereinstimmung nur auf einer Seite genügt nicht.
Warum ist die genaue Systemgeneration wichtig?
Hersteller können unterschiedliche Aufnahmen unter ähnlichen Produktnamen anbieten. Notiere Baureihe und gegebenenfalls Elementnummer deiner vorhandenen Ausrüstung vor der Auswahl.
Was prüfst du nach dem Ansetzen des Werkzeugs?
Kontrolliere am Boden, ob alle vorgesehenen Verriegelungen greifen und das Werkzeug nicht ungewollt verdreht oder herausrutscht. Erst danach wird die Stange ausgezogen.
The brand behind your equipment
GARDINER offers telescopic poles for water delivery, pool brushes, and accessories. Discover SLX and XTREME, as well as Quick-LoQ components for your cleaning system.