{"product_id":"unger-15436-ro-membranpflegemittel-membranschutz-1l","title":"UNGER 15436 RO Membrane Care and Protection 1L","description":"\u003cp\u003eThe UNGER membrane maintenance solution 15436 is available in a 1-liter size for the maintenance of suitable RO membranes.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures and application\u003c\/h3\u003e\n\n\u003cp\u003eDo not expose your UNGER RO system to frost! The UNGER RO membrane maintenance solution is intended solely for membrane maintenance, not as an antifreeze!\u003c\/p\u003e\n\n\u003cp\u003eThe membrane of the RO pure water filter system achieves its optimal service life with a regular flow of water or flushing.\u003cbr\u003eIf the UNGER HydroPower RO is not used for an extended period (at the latest from the 7th day), the membrane must be protected against blockage.\u003cbr\u003eFor this purpose, the UNGER membrane maintenance solution is available\u003cbr\u003eYou need one bottle (1 l) for each membrane. (For the RO40C, this is filter 2+3)\u003cbr\u003eThis preserves the current condition of the membrane and prevents reduced performance or failure after a long period of inactivity.\u003cbr\u003eAlternatively, you can run the device for approximately 30 minutes once a week to flush the membranes.\u003c\/p\u003e\n\n\u003cp\u003eTo protect the membrane, proceed as follows:\u003cbr\u003e1. Switch off the UNGER HydroPower RO and disconnect the power supply.\u003cbr\u003e2. Drain the water from the HydroPower RO. To do this, unscrew all filter caps and open the pressure relief valve on the back of the HydroPower RO until no more water flows out.\u003cbr\u003e3. Close the pressure relief valve and screw the yellow sealing cap onto the concentrate outlet.\u003cbr\u003e4. Remove the pre-filter and resin filter cartridges and store them in a plastic bag.\u003cbr\u003e5. Fill one bottle of UNGER membrane maintenance solution (1 l) into each of the two rear membrane tanks.\u003cbr\u003e6. Fill the three tanks (#1 pre-filter + both membranes #2, #3) with tap water until all three tanks are filled to just below the top edge. Tank #4 can remain without water.\u003cbr\u003e7. Screw all 4 tanks shut again.\u003cbr\u003eThe membranes are now protected and the UNGER HydroPower RO can be stored away.\u003c\/p\u003e\n\n\u003cp\u003eRecommissioning the UNGER HydroPower RO:\u003cbr\u003e1. Unscrew all 4 filter caps.\u003cbr\u003e2. Drain the water. To do this, unscrew the yellow sealing cap and install the concentrate hose. Now open the pressure relief valve.\u003cbr\u003e3. Insert the filters. Pay attention to the correct position.\u003cbr\u003e4. Screw the caps back onto the tanks and start the system.\u003cbr\u003e5. The membrane maintenance solution is automatically flushed out and the resin filter is protected by the bypass.\u003c\/p\u003e\n\n\u003ch3\u003eDetermine the suitable filter and replacement parts\u003c\/h3\u003e\n\n\u003cp\u003eMatch the exact system designation with the stated compatibility. Filter inserts, membranes, and resin refills perform different tasks and are not interchangeable at will. Schedule replacements and maintenance according to the operating instructions and the measured values of your system.\u003c\/p\u003e","brand":"Unger Global","offers":[{"title":"Default Title","offer_id":64133335581002,"sku":"WCS12069","price":33.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/6433\/6202\/files\/unger-15436-ro-membranpflegemittel-membranschutz-1l-global-weisse-242.webp?v=1793198458","url":"https:\/\/www.windowcleanershop.com\/en\/products\/unger-15436-ro-membranpflegemittel-membranschutz-1l","provider":"Window Cleaner Shop","version":"1.0","type":"link"}